Step 1. Make sure you are connected to your Kuwfi router via Ethernet or WiFi.


Step 2. Open a browser and navigate to the following IP address.


192.168.10.1


Username: admin

Password: admin


Step 3. Click on "3G/4G at the top menu ribbon.



Step 4. Select the drop down menu labeled "3G/4G ISP" and select "User defined". Highlight the field and enter the following APN based on your carrier/plan.


Blue 400 Plan: broadband

Pink Unlimited Plan: b2b.static


Click on"Apply"



Step 5. Power cycle the device by clicking the power button located on the back of the router. Leave it powered off for 30 seconds, then click it in again to boot up the router. Give it 3-5 minutes to fully boot and connect.